Text to STL for functional parts
Type what the part is for and the sizes that matter, and download an STL for your slicer. TypePart builds an exact CAD solid first, so you get STEP too, and every size can still be changed after the part is made.
How to write a description that works
A short description like "battery box" works, but you will get our guesses. "Box for 18650 batteries holding 4 cells in a row, 2 mm walls, open top" gets you the part you mean, and TypePart lists every assumption it still had to make.
- Give the sizes that matter in millimetres: outside size, inside size, wall, hole diameters.
- Say what it must fit: the screw size, the board, the pipe or the cable.
- Say how many: four holes, three compartments, two barbs.
- Say what is open or closed: an open top, a snap-on lid, a slot for a cable.
From text to 3D print
- Describe the part. Generating is free.
- Turn it in 3D and read its measured size, thinnest wall and the checks against your request.
- Change any size with a slider.
- Download the STL, slice it and print. The STEP file comes with it.
Try one of these
Questions
Is text to STL the same as text to 3D print?
Close. Text to STL gives you the file; your slicer turns it into a print. TypePart stops at the file and tells you what it measured, so you can print with confidence in the sizes.
What if I leave a size out?
TypePart picks a sensible value and writes it down as an assumption, so you can see it and change it with a slider.
Can it put text or a logo on a part?
Not yet. Lettering is on the list of things TypePart does not make yet.
Do I need an account?
Not for your first try: you can generate a part without signing in, once a day. A new account gets one free credit to download its first part.