Loading
Loading
A snap-lid case for a specific development board, with standoffs at its mounting holes and openings for its connectors.
Other sizes and the STEP file use 1 credit, once for this part.
| Wall | 2 mm |
|---|---|
| Gap around the board | 1 mm |
| Standoff height | 4 mm |
| Space above the tallest part | 2 mm |
| Connector opening gap | 0.5 mm |
Outline, holes and connector positions from Raspberry Pi's mechanical drawing RP-008347-DS (PDF, pip.raspberrypi.com/documents/RP-008347-DS, also datasheets.raspberrypi.com/rpi5/raspberry-pi-5-mechanical-drawing.pdf). USB-C (3.2 mm) and micro-HDMI (3.4 mm) heights as dimensioned there; connector widths, the other heights, the power button, the microSD card and the 1.41 mm board thickness measured from the same drawing's 1:1 vector lines. The vented lid is for the Raspberry Pi Active Cooler, whose maker says a case used with it should not be covered (Active Cooler product brief, Physical specification); the cooler is 13.7 mm tall overall, below the USB ports' 16.4 mm. Board names are used only to say what the case fits; TypePart is not affiliated with the board makers.
Every part is a starting point. Check every dimension before printing or manufacturing. We make no promise about strength or load.