M4 spacer, 20 mm long, 8 mm outside
A plain round spacer (sleeve) that a bolt passes through.
Other sizes and the STEP file use 1 credit, once for this part.
Dimensions
| Outside diameter | 8 mm |
|---|
| Hole diameter | 4.5 mm |
|---|
| Length | 20 mm |
|---|
Checked by our engine
- One closed solid, measured 8 × 8 × 20 mm
- Thinnest wall 1.8 mm
- About 1 g of PLA if printed solid (less with normal infill)
Printing notes
- Print standing up. Small holes often print slightly undersized; drill them out to size if the bolt is tight.
- For spacers under a load, use 100% infill.
Every part is a starting point. Check every dimension before printing or manufacturing. We make no promise about strength or load.