Hose adapter 19 mm to 13 mm with barbs
A reducer that joins two hoses or pipes of different sizes, with optional barbs to grip the hose.
Other sizes and the STEP file use 1 credit, once for this part.
Dimensions
| Large end outside diameter | 19 mm |
|---|
| Small end outside diameter | 13 mm |
|---|
| Wall | 1.6 mm |
|---|
| Large end length | 17 mm |
|---|
| Small end length | 17 mm |
|---|
| Barbs per end | 3 |
|---|
Checked by our engine
- One closed solid, measured 20.9 × 20.9 × 40 mm
- Thinnest wall 1.5 mm
- Some surfaces overhang more than 45° as the file is oriented; they may need supports or a different orientation.
- About 4 g of PLA if printed solid (less with normal infill)
Printing notes
- Print standing up with no supports.
- Use PETG or ASA for water or outdoor use. Printed adapters are not for pressurised lines.
- Add a hose clamp on each end for a tight seal.
Every part is a starting point. Check every dimension before printing or manufacturing. We make no promise about strength or load.