Cable clip for a 12 mm cable
A screw-down clip that a cable snaps into from the top.
Other sizes and the STEP file use 1 credit, once for this part.
Dimensions
| Cable diameter | 12 mm |
|---|
| Wall | 2 mm |
|---|
| Width | 12 mm |
|---|
| Tab length | 12 mm |
|---|
| Tab thickness | 2.5 mm |
|---|
| Screw hole | 3.4 mm |
|---|
Checked by our engine
- One closed solid, measured 28.3 × 12 × 13.7 mm
- Thinnest wall 2 mm
- Some surfaces overhang more than 45° as the file is oriented; they may need supports or a different orientation.
- About 2 g of PLA if printed solid (less with normal infill)
Printing notes
- Print as it lies, with the tab on the bed.
- PETG flexes more than PLA, which makes the snap-in easier and less likely to crack.
Every part is a starting point. Check every dimension before printing or manufacturing. We make no promise about strength or load.